- Date:Dec 09, 2021
- Location: India
- Time: 2:00 PM IST
Note: Moldex3D reserves the right to cancel an event in case of an insufficient number of participants.
Moldex3D India hosts biweekly webinars to teach users how to use Moldex3D Studio 2020 and 2021. Our E-learning for India is divided into four topics: pre-processing, processing, post-processing (filling and packing), and post-processing (cooling and warpage). In each session, our expert will introduce the basics of the software, then provide a step-by-step live demo. Users are encouraged to raise questions during the E-learning and our expert will answer them to ensure better understanding.Topic
Join us on the E-learning for India and explore how Moldex3D takes your moulding injection analysis to the next level.
Pre-Process
In Pre-Processing, we will showcase how to build a simulation model using two kinds of meshing tools: eDesign mesh and solid mesh (BLM). While the former provides a quick and easy way to build a simulation model, the latter features a more complex but flexible method with which users can control node seeding and therefore generate a more complicated project. Also will be introduced are several tools such as Merge & Move node, Stitch, and Fill hole to help fix broken mesh areas, making pre-processing in Moldex3D simple and quick. 【Learn More】
Date | Time | |
February 18, 2021 | 2:00 PM IST | Closed |
April 29, 2021 | 2:00 PM IST | Closed |
June 24, 2021 | 2:00 PM IST | Closed |
August 19, 2021 | 2:00 PM IST | Closed |
October 21, 2021 | 2:00 PM IST | Closed |
Topic
Process
In Processing, we will show how to set the correct process parameters using the Moldex3D Process Wizard to prepare for a realistic simulation. In addition, we will introduce three different process modes available in the software: the CAE mode, the Machine mode 1, and the Machine mode 2, giving users the options to set up an appropriate project that is the closest to the actual production. 【Learn More】
Date | Time | |
March 4, 2021 | 2:00 PM IST | Closed |
May 13, 2021 | 2:00 PM IST | Closed |
July 8, 2021 | 2:00 PM IST | Closed |
September 9, 2021 | 2:00 PM IST | Closed |
November 11, 2021 | 2:00 PM IST | Closed |
Topic
Post-Process – Filling, Packing
In Post-Processing – Filling & Packing, we will show how to interpret and understand the simulation results in the filling and packing stage. Users will also learn how to identify and prevent potential part defects caused by melt-flow behaviour and geometry design. 【Learn More】
Date | Time | |
March 18, 2021 | 2:00 PM IST | Closed |
May 27, 2021 | 2:00 PM IST | Closed |
July 22, 2021 | 2:00 PM IST | Closed |
September 23, 2021 | 2:00 PM IST | Closed |
November 25, 2021 | 2:00 PM IST | Closed |
Topic
Post-Process – Cooling, Warpage
As cooling cycle sometimes accounts for as much as 80% of the production time, it is important to understand and improve the material behaviour in the cooling stage in order to reasonably shorten it. Also crucial is the warp analysis, which may greatly help produce products that meet the specification and function well at the same time. In Post-Processing – Cooling & Warpage, we will show how to interpret the simulation results with the aim of optimizing product designs. We will also cover fibre-filled material, so users will understand how fiber orientation caused by flow may affect product strength. 【Learn More】
Date | Time | |
April 15, 2021 | 2:00 PM IST | Closed |
June 10, 2021 | 2:00 PM IST | Closed |
August 5, 2021 | 2:00 PM IST | Closed |
October 7, 2021 | 2:00 PM IST | Closed |
December 9, 2021 | 2:00 PM IST | Closed |
Contact
Khaled EL Bchiri
khaled.bchiri@moldex3d.com
Abhishek Tiwari
+91-98331-97831
abhishek.t@moldex3d.com