- Date:Mar 10, 2021
- Location: Europe, Asia Pasific
- Time: 10:00 AM CET/ 2:30 PM IST
10:00 AM CET/ 2:30 PM IST | Wednesday, March 10, 2021 | Check Your Time
Registration Deadline: one day before the webinar.
The join link will not be provided to the registration on the webinar day.
Foam injection molding, like MuCell® and chemical blowing agent (CBA), is capable of mass-producing parts with complex geometries and excellent dimensional stability, and is widely used in automotive, electronic/electrical products, construction, outdoor products and many other applications. In MuCell® process, supercritical fluid (SCF), usually nitrogen (N2) or carbon dioxide (CO2), is mixed with polymer melt to create a single-phase polymer/gas solution, which is then injected into the mold cavity, and finally bubbles are formed in the product. In CBA process, the chemical foaming agents are mixed with plastic granules as colorants or additives. The chemical reaction is completed in barrel and the gas is dissolved in the melt. The gas bubbles start growing during filling stage while the release of pressure and formed in the product.
What you will learn
- Introduction of Foam Injection Molding
- Moldex3D FIM features and benefits
- Result Interpretation
- Case Study
Don’t Miss Our Upcoming Webinars!
DATE | TIMEZONE | TOPIC |
---|---|---|
2022/05/11 | 2:30 PM EDT | Shrinkage and Warpage, Cause and Solution |
2022/05/25 | 2:30 PM EDT | Understanding Shear Stress & Shear Rate as a Simulation Output |