Vietnamese Webinar Series 2021: Qui tắc chung về vị trí cổng phun trong Phun ép nhựa

  • Date:Apr 01, 2021
  • Location: Vietnam
  • Time: 10:30 AM GMT+7

10 giờ 30 phút sáng | Ngày 1 tháng 4 năm 2021

Có một số yếu tố được xem xét để quyết định vị trí cổng trong ép phun, chẳng hạn như cân bằng dòng chảy, hiệu ứng bảo áp, đường hàn trên bề mặt và khuyết tật do dòng chảy ngắc ngứ. Tỷ lệ L/T có thể là một giải pháp nhanh chóng để quyết định số lượng và vị trí cổng phun, và đặc tính vật liệu cũng cần được xem xét. Với mô phỏng ép phun, ta có thể dễ dàng phát hiện ra tác động của tất cả các yếu tố và thậm chí có thể sử dụng tính năng cố vấn vị trí cổng (Gate location advisor). Trong hội thảo trực tuyến này, bạn sẽ tìm hiểu ảnh hưởng của từng yếu tố đến sự quyết định vị trí cổng, cách tối ưu hóa số lượng cổng và ứng dụng trong trường hợp thực tế.

Rule of Thumb of Gate Location in Injection Molding

There are some considered factors to decide the gate location in injection molding, such as flow balance, packing effect, weld line on the surface appearance, and avoiding hesitation. L/T ratio can be a quick solution to decide the number of gates and the position, though the type of material also needs to be considered. With injection molding simulation, all the factors’ impact can be easily discovered and even there is gate location advisor feature can be employed. In this webinar, you will find out how each factor influence the decision of gate location, how to optimize the number of gates, and the application in the real case.

Contact

For sales & technical inquiries, please write to Victor Nguyen at victornguyen@moldex3d.com
For event & marketing inquiries, please write to Claire Yang at claireyang@moldex3d.com

 

Don’t Miss Our Upcoming Webinars!

DATETIMEZONETOPIC
2021/09/2310:00 AM GMT+7Tối ưu hóa công nghệ khuôn RTM với Moldex3D

Test drive Moldex3D

Join the thousands of companies using Moldex3D

Talk to Sales

Schedule a product demo with our sales team