Thai Webinar Series 2021: กฎของการวางตำแหน่งเกทในการฉีดขึ้นรูป

  • Date:Apr 07, 2021
  • Location: Thailand
  • Time: 10:00 AM GMT+7

10:00 น. เวลาประเทศไทย | วันพุธที่ 7 เมษายน 2564

ในหัวข้อนี้จะกล่าวถึงปัจจัยบางประการสำหรับการพิจารณาการวางตำแหน่งเกทในการฉีดขึ้นรูป เช่น ความสมดุลของการไหล ผลกระทบของการฉีดย้ำ เส้นรอยเชื่อมบนพื้นผิวและการหลีกเลี่ยงปัญหาความลังเลในการไหล อัตราส่วน L / T อาจเป็นวิธีที่แก้ปัญหาที่รวดเร็วในการกำหนดจำนวนและตำแหน่งของเกท แต่ยังต้องพิจารณาประเภทของวัสดุด้วย ในการจำลองการฉีดขึ้นรูป เราจะค้นพบผลกระทบของปัจจัยทั้งหมดได้อย่างง่ายดายและในโปรแกรมก็จะมีฟังก์ชั่นช่วยหาตำแหน่งเกทอีกด้วย ในการสัมมนาทางเว็บนี้คุณจะได้พบว่าแต่ละปัจจัยนั่นส่งผลต่อการตัดสินใจในการวางตำแหน่งเกทอย่างไร รวมไปถึงวิธีกำหนดจำนวนเกทที่เหมาะสมและการนำไปประยุกต์ใช้ในชิ้นงานจริง

Rule of Thumb of Gate Location in Injection Molding

There are some considered factors to decide the gate location in injection molding, such as flow balance, packing effect, weld line on the surface appearance, and avoiding hesitation. L/T ratio can be a quick solution to decide the number of gates and the position, though the type of material also needs to be considered. With injection molding simulation, all the factors’ impact can be easily discovered and even there is gate location advisor feature can be employed. In this webinar, you will find out how each factor influence the decision of gate location, how to optimize the number of gates, and the application in the real case.

Contact

คุณปรัชญาพร พลวริษฐ์กูล
โทรศัพท์: +66 (0) 2-276-2880
แฟกซ์: +66 (0) -2-276-2882

 

Don’t Miss Our Upcoming Webinars!

DATETIMEZONETOPIC

Test drive Moldex3D

Join the thousands of companies using Moldex3D

Talk to Sales

Schedule a product demo with our sales team