Webinar: Mold Compensation Method to Reduce Shrinkage

  • Date:Sep 16, 2020
  • Location: Europe, Asia Pasific
  • Time: 10:00 AM CEST/ 1:30 PM IST

10:00 AM CEST/ 1:30 PM IST | Wednesday, September 16, 2020 | Check Your Time

Mold compensation method is one of the most common way to overcome shrinkage. As the part will naturally shrink, finding the number of the compensation is the critical key of this method. By using Moldex3D, process of designing the mold become much faster since the simulation replaces the traditional trial-and-error method. Collecting the necessary and correct data is the most important step before running the simulation because they could minimize the potential problem and determine the success of simulation to get the correct mold compensation. In this webinar, you will learn the step by step of mold compensation method, from what data are necessary to be collected, how to prepare the mesh and process setting, until the result comparison.

 

 

Don’t Miss Our Upcoming Webinars!

DATETIMEZONETOPIC
2021/01/2710:00 AM CET/ 2:30 PM ISTAchieving Lightweight Part Through Fluid-Assisted Injection Molding
2021/02/032:30 PM ESTTips & Tricks: Warpage Analysis & Visualization Techniques
2021/02/03ore 10:00Simulazione e validazione del sistema di raffreddamento per uno stampo ad iniezione
2021/02/17ore 10:00Tecniche di analisi e simulazione dei fenomeni relativi alla deformazione

Test drive Moldex3D

Join the thousands of companies using Moldex3D

Talk to Sales

Schedule a product demo with our sales team