Webinar: Eliminating Sink Mark and Voids in Injection-Molded Parts

  • Date:Jul 22, 2020
  • Location: 10:00 AM CEST/ 1:30 PM IST

10:00 AM CEST/ 1:30 PM IST | Wednesday, July 22, 2020 | Check Your Time

Part thickness variation and uneven shrinkage are the main cause of sink mark and voids. The key to tackle this surface quality problems is improving the mold design, such as changing the cooling layout, moving gate location or changing the gate diameter, and modifying process setting, such as increasing packing time, decreasing the melt temperature, increasing cooling time, etc. Moldex3D takes role in the solution by providing the sink mark indicator, so that the engineer can do the analysis to find the best mold design and the process setting. In this webinar, you will learn from the various real cases about how to take advantage of Moldex3D in discovering solution for sink mark and voids.

What will be covered in this webinar:

  • What are sink marks and voids?
  • Moldex3D sink mark simulation capabilities & analysis
  • Case studies


Don’t Miss Our Upcoming Webinars!

2020/08/0510:00 AM CEST/ 1:30 PM ISTCompression Molding Analysis in Moldex3D 2020
2020/08/052:30 PM EDTSolving Weld Line and Air Traps Through Simulation
2020/08/1910:00 AM CEST/ 1:30 PM ISTRule of Thumb of Gate Location in Injection Molding
2020/08/192:30 PM EDTHow to Run a Successful Warpage Analysis in the Part Design Phase
2020/09/162:30 PM EDTUtilizing Sequential Valve Gating to Improve Surface Quality
2020/09/302:30 PM EDTInjection Composite Simulation using Advanced Fiber Technologies

Test drive Moldex3D

Join the thousands of companies using Moldex3D

Talk to Sales

Schedule a product demo with our sales team