- Date:May 13, 2020
- Location: 2:30 PM EDT
2:30 PM EDT | Wednesday, May 13, 2020 | Check Your Time
A question faced by engineers, purchasing agents, mold builders, and injection molders is how best to build and run a mold to support the final molded part’s required performance at a competitive price. Many times molding risks are not totally understood or cost priorities take precedence over product performance. Once these decisions are made, most of the time band-aid approaches are often taken trying to salvage a difficult molded part with the cheapest solution. Many times the cheap solution ends up being far more problematic and costly.
In this webinar, ProCAD technologies follows a real world case study recently completed on an existing product and reviews the process starting from identifying issues in the existing product and mold design, analyzing the root cause of the problem, reviewing options and verifying those options with Moldex3D to create the best plan of action.
Don’t Miss Our Upcoming Webinars!
DATE | TIMEZONE | TOPIC |
---|---|---|
2022/05/11 | 2:30 PM EDT | Shrinkage and Warpage, Cause and Solution |
2022/05/25 | 2:30 PM EDT | Understanding Shear Stress & Shear Rate as a Simulation Output |