- Date:Nov 10, 2021
- Location: Thailand
- Time: 10:00 AM GMT+7
เนื่องจากสถานการณ์โรคระบาดโคโรน่าไวรัส (COVID-19) เราจึงขอเปลี่ยนการอบรมเวิร์คช็อปเป็นการอบรมออนไลน์
Upcoming Dates ตารางการอบรม
วันที่ | เวลา | ลงทะเบียนตอนนี้ |
27 มกราคม 2564 | 10:00 น. เวลาประเทศไทย | Closed |
12 พฤษภาคม 2564 | 10:00 น. เวลาประเทศไทย | Closed |
11 สิงหาคม 2564 | 10:00 น. เวลาประเทศไทย | Closed |
10 พฤศจิกายน 2564 | 10:00 น. เวลาประเทศไทย | Closed |
ข้อบกพร่องของงานฉีดพลาสติกในขั้นตอนการฉีด
Moldex3D มีความยินดีที่จะเชิญคุณเข้าร่วมการเทรนนิ่งที่จะถึงนี้ในปี 2564
Moldex3D เป็นเครื่องมือทางวิทยาศาสตร์เพื่อใช้ในกระบวนการฉีดขึ้นรูปพลาสติก ซึ่งจะสามารถช่วยผู้ใช้งานตรวจสอบปัญหาที่จะเกิดขึ้นกับตัวชิ้นงานฉีดพลาสติกก่อนที่จะทำแม่พิมพ์จริงด้วยผลการจำลองการฉีด ดังนั้นลูกค้าสามารถประหยัดเวลาและค่าใช้จ่ายในการทดลองทำแม่พิมพ์และซ่อมแซมผลิตภัณฑ์ งานเทรนนิ่งครั้งนี้มีจุดมุ่งหมายเพื่อให้ความรู้และความเข้าใจเกี่ยวกับการอ่านผลการวิเคระห์ที่อาจนำไปสู่ปัญหาที่อาจเกิดขึ้นกับตัวชิ้นงานฉีดพลาสติก และวิธีการแก้ปัญหาต่างๆ
ในการสัมมนาผ่านเว็บนี้จะมุ่งเน้นในปัญหาหลักๆที่เกี่ยวข้องกับการไหลของพลาสติก หรือ ขั้นตอนการฉีด (Filling)โดยเฉพาะ รวมถึงข้อบกพร่องที่อาจเกิดขึ้นที่เป็นผลมาจากการวางตำแหน่งเกต ตัวอย่างเช่น flow balance, weld line, short shot หรือการดูลักษณะการไหลในแบบต่างๆที่ส่งผลต่อการเกิดข้อบกพร่องในชิ้นงาน โดยใช้ซอฟแวร์ของ Moldex3D เป็นตัวช่วยในการวิเคราะห์ ด้วยหัวข้อเหล่านี้ คุณจะสามารถเข้าใจได้ถึงวิธีการใช้งานซอฟแวร์เพื่อศึกษาและแก้ปัญหาที่เกิดขึ้นกับงานฉีดพลาสติกได้ดียิ่งขึ้น
Contact
คุณปรัชญาพร พลวริษฐ์กูล
โทรศัพท์: +66 (0) 2-276-2880
แฟกซ์: +66 (0) 2-276-2882
Moldex3D Online Training 2021 – Injection Defects – Filling
Moldex3D is pleased to invite you to the upcoming workshop series in 2021.
Moldex3D is a scientific tooling of plastic injection molding. It can help users to check the injection problems before making mold by simulation results. Therefore, customers can save time and money on trial mold and repaired product. The purpose of this training class is to contribute the knowledge and understanding of Moldex3D analysis result that will lead to the potential problem that could occur with a real plastic injection part.
In this online training, we will focus on the major issues related to plastic flow pattern or the filling process. As well as the affect from locating gate location such as flow balance, weld line, short shot or viewing flow characteristics that affect the occurrence of defects in the product. With the help of scientific tooling like Moldex3D software to analyze the result and solve these issues, you will know more about how to use the software to help study and optimize the potential issue of plastic injection part.
Contact
Ms. Pratchayaporn Phonwaritkul
Tel: +66 (0) 2-276-2880
Fax: +66 (0) 2-276-2882