TGI Seminar: Gas-assisted in Plastic Injection Molding and Software Application

  • Date:Sep 22, 2017
  • Location: Thailand ,Bangkok

In recent years, the limitation of the plastic injection product of thickness is generally within 3-4mm only. If the product is designed to be thicker than this range, then it will cause defects and problems, such as collapses, take longer cycle time and increase material costs, etc.

To help mold designer reducing the process and mold design problem, Thai – German Institute has organized seminar of the gas assisted in plastic injection molding and using software to predict injection results. Moldex3D is honor to be invited to share the Case Study of “CAE Benefit and Application for Gas Assist Injection Molding”. If you are interested to explore the possible solutions to your plastic product design challenges, then welcome to join us.

Purpose

  • Understand the use of gas technology to solve the problem of product design for plastic injection molding.
  • Get knowledge about the process of mold design for gas assist in plastic injection molding.
  • Understand the use of CAE software to help analyze and predict the outcome of the process.

Who should attend

  • Someone with working experience related to plastic part design, plastic injection mold design
  • Plastic Product Designers There is a need to learn how to use gas to assist in plastic injection.
  • Those who are interested in plastic injection molding technology.

ในช่วงไม่กี่ปีที่ผ่านมา ข้อจำกัดในเรื่องความหนาของผลิตภัณฑ์ฉีดขึ้นรูปพลาสติกโดยทั่วไปอยู่ที่ 3-4 มิลลิเมตรเท่านั้น หากผลิตภัณฑ์ได้รับการออกแบบให้หนากว่าช่วงดังกล่าวนี้จะทำให้เกิดข้อบกพร่องและปัญหาต่างๆ เช่น การยุบตัว ต้องใช้เวลาในการขึ้นรูปนานขึ้นและเพิ่มต้นทุนวัสดุ ฯลฯ

ดังนั้นเพื่อช่วยให้ผู้ออกแบบแม่พิมพ์ลดขั้นตอนและปัญหาในการออกแบบแม่พิมพ์ ทางสถาบันไทย – เยอรมันจึงได้จัดสัมมนาเรื่องการฉีดขึ้นรูปพลาสติกโดยใช้แก๊สช่วยและการประยุกต์ใช้ซอฟต์แวร์ขึ้นเพื่อทำนายผลการฉีด โดยทาง Moldex3D รู้สึกเป็นเกียรติอย่างยิ่งที่ได้รับเชิญเข้าร่วมงานเพื่อแบ่งปันกรณีศึกษาเรื่อง “ประโยชน์และการประยุกต์ใช้งาน CAE สำหรับการฉีดขึ้นรูปพลาสติกโดยใช้แก๊สช่วย” หากท่านสนใจที่จะค้นหาแนวทางการแก้ไขปัญหาในการออกแบบผลิตภัณฑ์พลาสติกของท่าน โปรดเข้าร่วมงานสัมมนากับเรา

วัตถุประสงค์

  • -ผู้เข้าฝึกอบรมมีความเข้าใจในการนำเทคโนโลยีเรื่องแก๊สมาช่วยแก้ปัญหาการออกแบบผลิตภัณฑ์สำหรับกระบวนการฉีดพลาสติก ได้อย่างเหมาะสม
  • – ผู้เข้าฝึกอบรม ได้รับความรู้เกี่ยวกับการกระบวนการ การออกแบบชิ้นงาน การออกแบบแม่พิมพ์ในการใช้แก๊สช่วยในกระบวนการฉีดขึ้นรูปพลาสติก
  • – ผู้เข้าฝึกอบรมมีความเข้าใจในการนำเทคโนโลยีทำนายผลด้วยซอฟแวร์(CAE) เพื่อช่วยวิเคราะห์และทำนายผลของกระบวนการ

กลุ่มเป้าหมาย

  • ผู้ปฏิบัติงานที่เกี่ยวข้องกับงานฉีดขึ้นรูปพลาสติก ได้แก่ วิศวกร ผู้ออกแบบผลิตภัณฑ์ ผู้ออกแบบแม่พิมพ์
  • ผู้ออกแบบผลิตภัณฑ์พลาสติก ที่มีความต้องการเรียนรู้กระบวนการใช้แก๊สช่วยในงานฉีดพลาสติก
  • ผู้ที่มีความสนใจเทคโนโลยีการฉีดขึ้นรูปพลาสติกพลาสติก

Agenda

Time Topic
08.30-09.00. Welcome and Register
09.00-09.15 Ceremony Opening
09.15-10.30 Introduction of Gas Assist Injection Molding Technology
By Mr. Montian Watcharakamol,  TGI
10.30-10.45 Coffee Break
10.45-11.45 Product Applications and Tooling Design Guide
BY Mr. Montian Watcharakamol,  TGI
11.45-12.00 Q & A
12.00-13.00 Lunch
13.00-15.00 Case Study:CAE Benefit and Application for Gas Assist Injection Molding.
By Mr.Kai Wang,  Moldex3D
15.00-15.15 Q & A
15.15-15.30 Coffee Break

Speaker

Montian Watcharakamol 
Manager, Thai – German Institute
Kai Wang
Technical Service Engineer, Moldex3D
B.S. Tool and Material Engineering King
Mongkut’s Institute of  Technology Thonburi
M.S. Advanced Engineering Material,
University of Manchester, England

Venue

Bangkok International Trade & Exhibition Center

Contact

Event Contact  Kasiphisan Sukjantha kasiphisan.s@tgi.mail.go.th   038-930100, 038-215033
Local Contact  Yiji Lin yijilin@moldex3d.com   +886-3-5600199 ext. 220

Test drive Moldex3D

Join the thousands of companies using Moldex3D

Talk to Sales

Schedule a product demo with our sales team