Register now and engage in an online Q&A session with our technical experts.
Can’t make it to the live webinar? Register anyway, and we’ll send you the recording

2:00 PM EDT | Wednesday, May 20, 2026 | Check Your Time

Unlock Moldex3D’s advanced capabilities for accurate compression molding simulation — from defect prediction to process optimization — and learn how to streamline your manufacturing workflow. Compression molding remains a cornerstone for high-volume, cost-effective production of composite and polymer parts. However, challenges such as insufficient material, improper force application, flash defects, uneven fiber orientation or residual stress often lead to quality issues.

With Moldex3D’s Compression Molding module, you can:

• Predict potential molding defects (e.g., flashing, surface imperfections, residual stresses) before tooling.
• Optimize process parameters including compression speed, force, and mold temperature.
• Simulate both thermoset and thermoplastic — including fiber-reinforced polymers (e.g. GMT, LFT) — enabling versatility for a wide range of applications.
• Accelerate development by reducing physical mold trials, saving cost and time while improving first-time-right rates.

Whether you are in automotive, electronics, consumer products, or other industries using compression molding, whether you are tooling engineer, process engineer, design engineer, manufacturing leads or managers — this webinar will provide valuable insight.

What Attendees Will Learn?

• Introduction to Compression Molding Simulation in Moldex3D — what’s possible now with the latest tools.
• Understanding common compression-molding defects and how simulation predicts them (e.g. flash, improper fill, residual stress, fiber orientation issues).
• How to optimize process parameters (compression speed, force, mold temperature) to reduce defects and improve part consistency.
• Case study: real-world example showing defect prediction, parameter tuning, and final result validation.

SPEAKER INTRO

Anand Bora  | Customer Success Manager Mr. Anand Bora is an alumnus of the University of Massachusetts, Lowell. He received a BS in Polymer Engineering in 1998 and an MS in Plastics Engineering in 2000. During his 20 years in the automotive industry, he has worked at OEMs, tier-1, and tier-2 suppliers in Design, Manufacturing, and Business Development. He is very knowledgeable not only in injection molding and compression molding, but also in blow molding, Dimensional Management, and Virtual Reality. At Moldex3D, he is involved in ensuring customers’ success, meaning your success.