Having trouble reading this email? View it in your browser
MAY. 2017 | Past Issues  
  | Top Story |
  Moldex3D Extends Non-matching Mesh Technology to Connect Part & Part Insert /Mold Base
Moldex3D R15.0 further extends the functionality of this non-matching feature by allowing users to generate a solid mold base for the model with non-matching part and part insert...

  | Tips and Tricks |
  Predict Filling Behavior in Resin Transfer Molding Through Simulation Tool
Moldex3D’s Resin Transfer Molding (RTM) is a 3D CAE module for simulating Resin Transfer Molding process. The RTM module has a smart and user-friendly wizard to help users assign RTM parameters and is able to provide accurate filling/curing analysis results...
Learn the step-by-step tips >>

  | Go for Successful Molding |
  Solving Aesthetic Issues of Electronic Component Insert Molding through Moldex3D
The SKF sensor unit in this case includes electronics that need adequate sealing mainly for preventing liquid ingress and mechanical protection. This can be achieved by potting and over molding. The project involves analyzing the over molding of electronics, connectors and cable with printed circuit board (PCB) material as inserts...
Read their story >>

  | Hot News|
  Partners from 22 Countries Attended Moldex3D FY’17 EMEA Channel Partner Meeting
“We have received lots of positive feedback about this meeting from our partners. It indicates we have further strengthened our market position in EMEA area,”...

  | My #Moldex3DStory |
  Predicting Tooling Problems before Production
For the second case, Moldex3D could predict the ABS and TPE bonding temperature and molding conditions. Thus, it helped them optimize the molding conditions to achieve the best bonding before the tooling started...
Read the winner’s story in full >>

[May 08-10, 2017] ANTEC 2017
[May 16-19, 2017] CHINAPLAS 2017
[May 17, 2017] Webinar: Simulation of In-mold Decorating (IMD) Process
[May 31-Jun 01, 2017] Webinar: Visualizing Flow Imbalance in Multi-cavity Systems
[Jun 04-07, 2017] PLASTICS-IN-MOTION 2017
[Jun 14, 2017] Webinar: Evaluating Hot Runner Systems to Improve Tool Quality
[Jun 28, 2017] Webinar: Identifying Optimal Design Parameters for Injection-molded Parts

Moldex3D Training and Certificate
Moldex3D Half Day Training Series- for APA Users
Moldex3D Transfer Molding Simulation Introduction

 Learning Resources
Utilizing CAE Tools to Overcome the Challenges of Multi-cavity Co-injection Molding
Moldex3D Links 3D Injection Molding Simulation with LS-DYNA Draping Analysis to Offer a More Comprehensive Analysis for Multi-component Molding Simulation
Moldex3D Supports Orthotropic Material Setting to Allow Consideration of the Effect of the Previous Shot in MCM
Assign Wire Materials Respectively to Predict Potential Defects in IC Packaging

 What's New
Moldex3D and Stratasys Collaborate for New White Paper on Validating 3D Printed Injection Molds
The Latest Release of Moldex3D R15.0 Streamlines Simulation Workflow to Provide Faster Turnaround for Plastic Part Designs
Moldex3D is Awarded the Prestigious “Taiwan Excellence Award”
Don't want to receive emails from us? Unsubscribe
Contact Moldex3D | Visit Moldex3D | Other Locations | Downloads
》CoreTech System (Moldex3D) Co., Ltd.,
8F-2, No.32, Taiyuan St.Chupei City, Hsinchu County 302, Taiwan
》Moldex3D North America Sales & Support Center
27725 Stansbury Blvd., Suite 190,Farmington Hills, MI 48334
Follow Moldex3D on  
Copyright © 2017 Moldex3D. All rights reserved.