Having trouble reading this email? View it in your browser
SEP. 2016 | Past Issues  
  | Top Story |
  Investigating the Gas Core-Out Ratio of Gas-Assisted Injection Molding through Advanced CAE Technology
Moldex3D Gas-Assisted Injection Molding (GAIM) module enables users to visualize the gas penetration behaviors and provides overflow predictions. Users can use the tool to optimize filling parameters...

  | Go for Successful Molding |
  CALIN Technology Eliminated Weld Lines on a Projector Lens Using Moldex3D
Through the simulation analysis, CALIN Technology was able to adjust and optimize the process parameters prior to real manufacturing to solve the weld line problem and improve product shrinkage...
Read their story >>

  | Tips and Tricks |
  Moldex3D CADdoctor – Simplify Complicated Geometric Features & Build High-Quality Mesh with Ease
Having too many complicated and unnecessary features in the original geometry design may lead to a poor-quality mesh or even mesh distortion in the pre-processing stage. Moldex3D CADdoctor can simplify complex or unnecessary geometric features like fillets and steps...
Learn the step-by-step tips >>

[Sep 09, 2016] Webinar: How to Prepare for and Run a Simulation Analysis in Moldex3D
[Sep 14, 2016] Webinar: Using Moldex3D to Predict and Avoid Sink Mark Issues in Injection Molded Parts
[Sep 23, 2016] Webinar: How to Interpret Moldex3D Simulation Analysis Results
[Sep 27-29, 2016] CAMX 2016
[Sep 28, 2016] Webinar: Using Simulation to Predict and Solve Warpage in Injection Molding
[Sep 28- Oct 01, 2016] VietnamPlas 2016
[Oct 04-06, 2016] Digimat Users’ Meeting 2016

Moldex3D Training and Certificate
Moldex3D Half Day Training Series- for APA Users
Thai-German Institute Training Course: CAE for Mould Design (Moldex3D)
Thai-German Institute Training Course: Plastic Injection CAE Results Interpretation

 Learning Resources
Control Rheological Properties through Advanced Non-Isothermal Resin Transfer Molding Simulation
New Theoretical Model Makes Simulation Analysis on the Orientation of Fiber Reinforced Plastics More Reliable
Setup Post Mold Curing Analysis for IC Packaging Simulation to Analyze Material’s Properties
Use Gate Location Advisor to Quickly Optimize Gating Design

 What's New
Moldex3D eDesignSYNC R14.0 Offers Enhanced Features to Accelerate Plastic Part Designs
Moldex3D CEO, Dr. Rong-Yeu Chang Elected to be A Fellow of Society of Plastics Engineerst
Don't want to receive emails from us? Unsubscribe
Contact Moldex3D | Visit Moldex3D | Other Locations | Downloads
》CoreTech System (Moldex3D) Co., Ltd.,
8F-2, No.32, Taiyuan St.Chupei City, Hsinchu County 302, Taiwan
》Moldex3D North America Sales & Support Center
27725 Stansbury Blvd., Suite 190,Farmington Hills, MI 48334
Follow Moldex3D on  
Copyright © 2016 Moldex3D. All rights reserved.