Having trouble reading this email? View it in your browser
AUG. 2015 | Past Issues  
Share This : facebook   linkedin   twitter   google+  
  Moldex3D’s Hot Runner Steady Analysis Helps Design Your Most Optimal Hot Runner System Faster and Better
  Moldex3D’s solver will conduct a Hot Runner Steady (HRS) Analysis based on the layout of the hot runners and the flow rate of each gate can be attained as a valuable reference for users to understand the flow behavior … 

  Optimize Molding Parameters to Improve Part Warpage through Moldex3D Expert Module
  The polymer injected between the two shells will solidify into a contact lens. Since the manufacturing standards of contact lenses require high dimensional accuracy, part warpage should be strictly controlled within a small and acceptable tolerance … 

    Moldex3D’s Fill Hole Wizard Helps Fill Undesirable Holes on Surface Mesh  
Closed free edge loops, usually called holes, are the results of missed, deleted, or misaligned mesh elements. They will lead to failure in solid mesh generation or have a significant negative impact on the analysis accuracy. To solve this issue, Fill Hole Wizard feature in Moldex3D R13 assists users to quickly … 

    What inspired automotive engineers to produce lighter plastic parts?    
An Aero chocolate bar! Engineers at Ford have turned to the tasty treat for inspiration to produce lighter plastic parts for Ford's vehicles. Plastic parts have traditionally been a difficult area to save weight without sacrificing strength and durability, but by looking to the Aero chocolate bar they have produced a lighter plastic by introducing gas bubbles into the plastic as it is molded. The result is a microscopic honeycomb structure that Ford says saves weight by reducing the amount of plastic used without compromising the integrity of the part.
Read the full article on Ford turns to chocolate bar to develop lighter plastic components >>
Moldex3D's Solution for MuCell® Technology >>

Learning Resources  
Expedite MuCell® Simulation Process with Simple Weight Reduction Ratio Set-up  
Simplify Runner System Analysis – Moldex3D Enhanced Solution Provides a Quicker and Reliable Simulation  
Utilize Moldex3D to Simulate Parting Surface Heating  
Moldex3D Provides Mold Preheat Analysis to Enhance Mold Temperature Management  
Moldex3D Selects Winners of Global Innovation Talent Award Contest  
Moldex3D Wins Prestigious James L. White Innovation Award for 2015 of the Polymer Processing Society (PPS)  
Moldex3D’s $1.625 Million Gift to Boost Education and Research at CU-ICAR  
Moldex3D eDesign 2 Day Training and Certificate  
Moldex3D Half Day Training Series- for APA Users  
[Aug 19, 2015] Webinar: Moldex3D R13 Tips and Tricks  
[Sep 09, 2015] Webinar: Gas/ Water-assisted Injection Molding  
[Sep 10-11, 2015] Molding Innovation Days 2015: Gdansk, Poland  
[Sep 14-18, 2015] International Engineering Fair 2015  
[Sep 16, 2015] Molding Innovation Days 2015: Istanbul, Turkey  
[Sep 23, 2015] Molding Innovation Days 2015: Lichfield Staffordshire, United Kingdom  
[Sep 23, 2015] Webinar: Predict Optical Performance Issues with Simulation Technology  
[Sep 24, 2015] Molding Innovation Days 2015: Warsaw, Poland  
[Sep 29 - Oct 01, 2015] Digimat User’s Meeting 2015  

Contact Moldex3D | Unsubscribe | Visit Moldex3D | Other Locations | Downloads
》CoreTech System (Moldex3D) Co., Ltd.,
8F-2, No.32, Taiyuan St.Chupei City, Hsinchu County 302, Taiwan
》Moldex3D North America Sales & Support Center
27725 Stansbury Blvd., Suite 190,Farmington Hills, MI 48334
Follow Moldex3D on  
Copyright © 2015 Moldex3D. All rights reserved.