Having trouble reading this email? View it in your browser
NOV. 2013 | Past Issues Share This:
CoreTech System Receives US Patent for Three-parameter Fiber Orientation Model
CoreTech System Co., Ltd. (Moldex3D) announced that the United States Patent and Trademark Office recently granted a new patent for the company’s innovative technology, U.S. Patent No. 8,571,828, that brings high-accuracy prediction to the orientation distribution of injection-molded fiber-reinforced thermoplastics …
Optimization of Fiber-reinforced Composites Process Parameters through Compression Molding
Compression molding is a high-volume and high-pressure method for manufacturing; especially for irregular-shaped products made of high strength fiber reinforced composites, and is also widely used for producing automotive parts, such as bumpers, engine covers, spoilers and other complex and tiny parts…
  Automotive Door Handle Manufacturer Uses Moldex3D to Solve Weld Line Issues
  There’s an obvious weld line appearing at the end of filling. The mold manufacturer tried several times but failed to avoid the occurrence of the weld line. Hu-Shan hoped to use Moldex3D molding simulation software to verify designs and understand the cause of the defect …

  How to Accurately Measure Product Dimension through Warpage Analysis
Moldex3D Warp has been widely used to estimate the mold shrinkage rate by many tooling suppliers. During the process of optimizing the processing conditions, the impact induced by product dimension or product size specification should always be taken into account while making changes on the design…
CoreTech System Receives US Patent for Three-parameter Fiber Orientation Model
LMT Mercer Group Selects Moldex3D as a Solution Partner for Product Development Process Optimization
CoreTech System Wins Best Paper at 2013 SPE ACCE
Injection Molding Design, Simulation & Analysis Workshop
Nov 19,2013-Dec 18,2013
PTC Live Tech Forum in Paris
Nov 19,2013
CDM Power Directions 2014 CDM Group Customers Forum
Nov 22,2013
Mold Design Hands-On Workshop
Nov 29,2013-Dec 20,2013
Plast Eurasia Istanbul 2013
Dec 05-08,2013
(India) Moldex3D eDesign 1-Day Training Camp
Nov 12,2013 ; Dec 10,2013
(Ohio) Moldex3D eDesign 2 Day Training and Certificate
Nov 14-15,2013
(Michigan) Moldex3D eDesign 2 Day Training and Certificate
Dec 09-10,2013
Adding Value to PLM with Integration of Molding Simulation and Structural Analysis
How to Complete the Injection Compression Molding Simulation Settings
Adding Value to Plastic Products through Annealing
Optimizing Gate Locations Using Moldex3D Expert Module
Plastic Injection Molding Optimization Technology- Design of Experiment (DOE) Method
Contact Moldex3D | Unsubscribe | Visit Moldex3D | Other Locations | Downloads

》CoreTech System (Moldex3D) Co., Ltd.,
8F-2, No.32, Taiyuan St.Chupei City, Hsinchu County 302, Taiwan
》Moldex3D North America Sales & Support Center
21800 Haggerty Road, Suite 109,Northville, MI, 48167 USA
Copyright © 2013 Moldex3D. All rights reserved.