Composites

[1] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Phenomenological Improvements to Predictive Models of Fiber Orientation in Concentrated Suspensions.” J Rheol 57 1597-1631 (2013).
https://sor.scitation.org/doi/10.1122/1.4821038

[2] Foss, P. H., H.-C. Tseng, J. Snawerdt, Y.-J. Chang, W.-H. Yang, and C.-H. Hsu, “Prediction of Fiber Orientation Distribution in Injection Molded Parts Using Moldex3d Simulation.” Polym Compos 35 671-680 (2014).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.22710

[3] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “An Objective Tensor to Predict Anisotropic Fiber Orientation in Concentrated Suspensions.” J Rheol 60 215-224 (2016).
https://sor.scitation.org/doi/10.1122/1.4939098

[4] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Prediction of Fiber Orientation and Mechanical Performance for Short/Long Glass and Carbon Fiber-Reinforced Composites.” Compos Sci and Technol 144 51-56 (2017).
https://www.sciencedirect.com/science/article/pii/S0266353816318802

[5] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Improved Fiber Orientation Predictions for Injection Molded Fiber Composites.” Composites Part A: Applied Science and Manufacturing 99 65-75 (2017).
https://www.sciencedirect.com/science/article/pii/S1359835X17301537

[6] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “An Integration of Microstructure Predictions and Structural Analysis in Long-Fiber-Reinforced Composite with Experimental Validation.” Int Polym Process 32 455-466 (2017).
https://www.hanser-elibrary.com/doi/abs/10.3139/217.3377

[7] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “The Use of Shear-Rate-Dependent Parameters to Improve Fiber Orientation Predictions for Injection Molded Fiber Composites.” Composites Part A: Applied Science and Manufacturing 104 81-88 (2017).
https://www.sciencedirect.com/science/article/pii/S1359835X17303974

[8] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Predictions of Fiber Orientation and Mechanical Properties for Injection-Molded Long-Glass-Fiber Thermoplastic Composites.” Compos Sci and Technol 150 181-186 (2017).
https://www.sciencedirect.com/science/article/pii/S0266353817308242

[9] Favaloro, A. J., H.-C. Tseng, and R. B. Pipes, “A New Anisotropic Viscous Constitutive Model for Composites Molding Simulation.” Composites Part A: Applied Science and Manufacturing 115 112-122 (2018).
https://www.sciencedirect.com/science/article/pii/S1359835X18303816

[10] Huang, C.-T. and H.-C. Tseng, “Simulation Prediction of the Fiber Breakage History in Regular and Barrier Structure Screws in Injection Molding.” Polym Eng Sci 58 452-459 (2018).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pen.24660

[11] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Accurate Predictions of Fiber Orientation and Tensile Modulus in Short-Fiber-Reinforced Composite with Experimental Validation.” Polym Compos 39 2847-2859 (2018).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.24277

[12] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Predictions of Fiber Orientation for Injection Molded Rectangle Plate and Tensile Bar with Experimental Validations.” Int Polym Process 33 96-105 (2018).
https://www.hanser-elibrary.com/doi/abs/10.3139/217.3404

[13] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Predictions of Fiber Orientation and Mechanical Properties for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites.” Polym Compos 39 3726-3739 (2018).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.24403

[14] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Effect of the Packing Stage on Fiber Orientation for Injection Molding Simulation of Fiber-Reinforced Composites.” J Thermoplast Compos Mater 31 1204-1218 (2018).
https://journals.sagepub.com/doi/abs/10.1177/0892705717734605

[15] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Predictions of Fiber Concentration in Injection Molding Simulation of Fiber-Reinforced Composites.” J Thermoplast Compos Mater 31 1529-1544 (2018).
https://journals.sagepub.com/doi/abs/10.1177/0892705717738302?journalCode=jtca

[16] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “The Use of Principal Spatial Tensor to Predict Anisotropic Fiber Orientation in Concentrated Fiber Suspensions.” J Rheol 62 313-320 (2018).
https://sor.scitation.org/doi/10.1122/1.4998520

[17] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Numerical Investigations of Fiber Orientation Models for Injection Molded Long Fiber Composites.” Int Polym Process 33 543-552 (2018).
https://www.hanser-elibrary.com/doi/abs/10.3139/217.3550

[18] Tseng, H.-C., M. Goto, R.-Y. Chang, and C.-H. Hsu, “Accurate Predictions of Fiber Orientation and Mechanical Properties in Long-Fiber-Reinforced Composite with Experimental Validation.” Polym Compos 39 3434-3445 (2018).
https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.24361

[19] Tseng, H.-C., R.-Y. Chang, and C.-H. Hsu, “Comparison of Recent Fiber Orientation Models in Injection Molding Simulation of Fiber-Reinforced Composites.” J Thermoplast Compos Mater (2018, First Published, https://journals.sagepub.com/doi/pdf/10.1177/0892705718804599).
https://journals.sagepub.com/doi/abs/10.1177/0892705718804599?journalCode=jtca

[20] Huan-Chang Tseng, “ Jeffery’s orbit leading to the foundation of flow-induced orientation in modern fiber composite materials”, Journal of Non-Newtonian Fluid Mechanics (Nov. 2022)
https://www.sciencedirect.com/science/article/abs/pii/S0377025722001458

Test drive Moldex3D

Join the thousands of companies using Moldex3D

Talk to Sales

Schedule a product demo with our sales team