On-demand Webinar: Eliminating Weld Lines with Rapid Heat and Cool Molding Simulation
For plastic parts requiring high quality surface finish, weld lines are definitely one of the top challenges. Rapid heat and cool, or variotherm, molding technologies have opened up new opportunities, enabling molders to achieve best possible surface quality within the shortest possible cycle time. However, many challenges also arise from the uncertain variables of the rapid heating and cooling process, for example, when is the best timing to switch between heating and cooling, and how the layout of the cooling channels will affect product quality.
In this webinar, we’ll demonstrate Moldex3D’s 3D transient cool analysis, which is capable of predicting and investigating the temperature variations over time. This will help injection molders gain a better understanding of the effects of various process parameters on part quality. With that, injection molders can ensure a high quality surface finish and achieve cycle time reduction.
Also – Don’t miss this upcoming live webinar!
|2019/05/22||10:30 AM CEST/2:00 PM IST||What's New in Moldex3D R17|
|2019/05/22||2:30 PM EDT||What's New in Moldex3D R17|
|2019/06/05||10:30 AM CEST/2:00 PM IST||Improving Structural Performance of Fiber-reinforced Plastic Parts|
|2019/06/05||2:30 PM EDT||Overcoming DFM Challenges Using Moldex3D Simulation Tools|
|2019/06/19||10:30 AM CEST/2:00 PM IST||Compression Molding Analysis Workflow in Moldex3D Studio|
|2019/06/19||2:30 PM EDT||How to Interpret Injection Molding Simulation Results in Moldex3D|
|2019/07/02||2:30 PM EDT||Improving Core Shift While Eliminating Material Degradation Using Moldex3D|
|2019/07/03||10:30 AM CEST/2:00 PM IST||Eliminating Weld Lines and Air Traps Using Simulation|
|2019/07/17||2:30 PM EDT||Gate Location and Process Optimization Using BLM with Moldex3D Interface in VisualDOC|