Held from September 14th to 17th, Moldex3D Virtual Symposium 2020 aims to provide a platform for Moldex3D users, partners, leaders, and professionals in the plastic engineering field to meet safely online during this critical time and exchange valuable insights and research breakthroughs.
The four-day event will start with 2-hour sessions for presentations from Monday to Wednesday. We will also introduce the highlights of our upgraded software – Moldex3D 2020.
On Thursday, we will be hosting a half-day training. It is a great opportunity to experience how Moldex3D can make your molding process easier and faster.
*Note: all non-user participants of the day 4 Hands-on Training will receive a free 30-day trial.
Join us and get more inspiration to unlock the next manufacturing revolution!
It is equipped with powerful simulation capabilities, advanced solution for 5G Era and up-to-date data management system. We hope to offer you the best solution to realizing smart manufacturing, which is fundamental in achieving Industry 4.0.
Day 1 │ Monday, September 14, 2020
Time (EST) | Session | Presenter |
1:30 PM – 1:45 PM | Log-in |
1:45 PM – 2:00 PM | Introduction |
2:00 PM – 2:30 PM | 3D Printing Process Simulation and Experimental Validation for Thermoplastics with Moldex3D | Ford R&D |
2:30 PM – 3:00 PM | Low Constant Pressure Molding: The iMFLUX “Green Curve” – Experiment and Simulation |
iMFLUX |
3:00 PM – 3:30 PM | Warpage Validation Study of an Engine Cover Part | Dana Holdings |
3:30 PM – 4:00 PM | An Investigation into Conformal Cooling using Moldex3D | Innova Engineering |
4:00 PM- 4:30 PM | Q & A |
Day 2 │ Tuesday, September 15, 2020
Time (EST) | Session | Presenter |
1:30 PM – 1:45 PM | Log-in |
1:45 PM – 2:00 PM | Introduction |
2:00 PM – 2:30 PM | Moldex3D 2020 Product Highlights and Future Directions | Moldex3D NA |
2:30 PM – 3:00 PM | Process Transfer with Moldex3D Simulation | RJG |
3:00 PM – 3:30 PM | A Real Case Study of Metallic Flake Application with Injection Molding Simulation | MABE |
3:30 PM – 4:00 PM | The Application of Stress Analysis for Injection Molded Part | Molex |
4:00 PM – 4:30 PM | Q & A |
Day 3 │ Wednesday, September 16, 2020
Time (EST) | Session | Presenter |
1:30 PM – 1:45 PM | Log-in |
1:45 PM – 2:00 PM | Introduction |
2:00 PM – 2:30 PM | Performance Study of the Cooling Components | MGS Manufacturing Group |
2:30 PM – 3:00 PM | Intelligent Melt Delivery: Hot-Runner Sequencing Based on Cavity Sensing |
HRSflow |
3:00 PM – 3:30 PM | Multi-Scale Modeling of the Replication of Textured Surfaces by Injection Molding | University of Massachusetts Lowell |
3:30 PM – 4:00 PM | From Process to Mechanics – The Development of Foam Injected Molding Parts by Using Simulation and its Optimization | SimpaTec Inc |
4:00 PM – 4:30 PM | Q & A |
Day 4 │ Thursday, September 17, 2020
Time (EST) | Session | Presenter |
1:00 PM – 1:30 PM |
Software Installation Help Desk / Log-in |
1:30 PM – 2:45 PM |
Quick Demo of Moldex3D Pre-Processing • CADdoctor • Meshing Best Practices • Advantages of Boundary Layer Meshing (BLM) |
Moldex3D NA |
2:45 PM – 3:00 PM |
Break |
3:00 PM – 4:30 PM |
Project Setup • Best Practices • Standard Simulation Workflow • Result Interpretation Studio Demo |
Moldex3D NA |
4:30 PM – 5:00 PM |
Q & A |
Copyright © 2020 Moldex3D. All rights reserved. | Privacy Policy