- Date:Jan 13, 2021
- Location: Europe, Asia Pasific
- Time: 10:00 AM CET/ 2:30 PM IST
10:00 AM CET/ 2:30 PM IST | Wednesday, January 13, 2021 | Check Your Time
Registration Deadline: one day before the webinar day.
Register on the same date of the session will not get the link to join the webinar.
Sprue pressure can be read from melt entrance until the VP-switch, right before the process changes to packing stage. After the melt enters the cavity, various things will cause flow restriction and then, the pressure requirement will increase gradually. Some factors may cause a difference between simulation and reality. The common discrepancies happen at the VP-switch point and at the feed zone. Each point has different various factors cause the discrepancy. Do you want to know what those factors are and how to fix it? Join this webinar and get your injection molding problems solved!
What you will learn:
- How to read the sprue pressure curve
- Where the pressure discrepancies originate from
- How to fix pressure discrepancies
Don’t Miss Our Upcoming Webinars!
DATE | TIMEZONE | TOPIC |
---|---|---|
2022/05/11 | 2:30 PM EDT | Shrinkage and Warpage, Cause and Solution |
2022/05/25 | 2:30 PM EDT | Understanding Shear Stress & Shear Rate as a Simulation Output |