- Date：Feb 07, 2018
- Location： Multiple time zones
Compression molding with Sheet Molding Compound (SMC) is a favored molding method for producing large, lightweight structural components by manufacturers across a wide range of industries. To help design engineers better predict the performance of the final SMC composite parts, it is necessary to take into account both flow and deformation behavior of SMC in compression molding to further investigate the influence of fiber orientation on mechanical strength. In this webinar, we’ll present how Moldex3D can be a viable solution that enables a more comprehensive, accurate simulation of SMC compression molding through a tighter integration with LS-DYNA.
Attend this webinar to learn:
- Introduction of Compression Molding Process with SMC
- Integrating LS-DYNA and Moldex3D in Compression Molding of SMC Simulation
- How to Interpret the Numerical Results from the Integration
We’re offering two sessions for this webinar, so be sure to attend the one that best fits your schedule! Calculate your time zone by clicking here.
|Wednesday, February 7, 2018||10:00 AM CET/2:30 PM IST|
|Wednesday, February 7, 2018||2:30 PM EST|
Also – Don’t miss this upcoming live webinar!
|2018/12/12||10:00 AM CET/2:30 PM IST||English||Simulation and Material Characterization of Polyurethane Foaming Process|
|2018/12/12||14:30 PM BRST||Português||Ferramentas Preditivas de Engenharia para Compósitos Termoplásticos de Fibra de Carbono Longo Moldado por Injeção|
|2018/12/12||14:30 PM CST||Español||Herramientas de Ingeniería Predictiva para Compuestos Termoplásticos con Fibras Largas de Carbono, Moldeados por Inyección|
|2018/12/19||2:30 PM EST||English||Optimize Your CAD Models for Injection Molding Analysis|
|2019/01/09||10:00 AM CET/2:30 PM IST||English||How to Optimize Gate Locations to Improve Moldability|
|2019/01/09||2:30 PM EST||English||How to Optimize Gate Locations to Improve Moldability|
|2019/01/23||10:00 AM CET/2:30 PM IST||English||How to Deal with Sink Marks and Voids in Injection-Molded Parts|
|2019/01/23||2:30 PM EST||English||How to Deal with Sink Marks and Voids in Injection-Molded Parts|